3M™ Dyneon™ PTFE Compound TF 4102

2018-09-08 17:56:22

Product Description:
Features

PTFE Compound with 10 % glass fibre

Free flow compound

Typical applications:

Valve seats

Piston rings

Bearings

General
Filler / Reinforcement	Glass Fiber, 10% Filler by Weight
Filler / Reinforcement	Glass Fiber, 10% Filler by Weight
Features	Good Flow
Features	Good Flow
Uses	Bearings	Valves/Valve Parts
Uses	Bearings	Valves/Valve Parts
Processing Method	Compression Molding	Sintering
Processing Method	Compression Molding	Sintering

Physical	Nominal Value	Unit	Test Method
Density	2.2	g/cm³	ISO 12086
Apparent Density	0.82	g/cm³	ISO 12086
Average Particle Size	580	µm	ISO 12086
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress² (Break)	22	MPa	ISO 12086
Tensile Strain² (Break)	460	%	ISO 12086
Deformation Under Load³ (23°C, 15 MPa)	11	%	ASTM D621
Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	40	MPa
Compression Molding Temperature	23 to 26	°C
Sintering Temperature	< 365	°C

3M&#8482; Dyneon&#8482; PTFE Compound TF 4102