3M™ Dyneon™ PTFE Compound TF 4302

2018-09-08 17:55:46

3M™ Dyneon™ PTFE Compound TF 4302
Polytetrafluoroethylene
10% Graphite Fiber
Product Description:
Features

PTFE Compound with 10 % graphite

Free flow compound

Typical applications:

Seals

Bearings

General
Filler / Reinforcement	Graphite Fiber, 10% Filler by Weight
Filler / Reinforcement	Graphite Fiber, 10% Filler by Weight
Features	Good Flow
Features	Good Flow
Uses	Bearings	Seals
Uses	Bearings	Seals
Processing Method	Compression Molding	Sintering
Processing Method	Compression Molding	Sintering

Physical	Nominal Value	Unit	Test Method
Density	2.17	g/cm³	ISO 12086
Apparent Density	0.79	g/cm³	ISO 12086
Average Particle Size	580	µm	ISO 12086
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress² (Break)	22	MPa	ISO 12086
Tensile Strain² (Break)	340	%	ISO 12086
Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	40	MPa
Compression Molding Temperature	23 to 26	°C
Sintering Temperature	< 365	°C

²Measured on sintered moldings

3M&#8482; Dyneon&#8482; PTFE Compound TF 4302