GAPEKK™ 3230GF

2023-02-27

GAPEKK™ 3230GF
Polyetherketoneketone
30% Glass Fiber
Product Description
Product Details: Ultra high performance thermoplastic polymer, 30% glass fiber reinforced in Polyether Ketone, semi-crystalline granules suitable for injection molding, easy flow, Beige in color.

Application Areas: Suitable for high temperature applications, where higher strength in load-bearing applications is required. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General
Filler / Reinforcement	Glass Fiber, 30% Filler by Weight

Features	Food Contact Acceptable	Good Sterilizability	Semi Crystalline

	Good Chemical Resistance	Good Strength

	Good Flow	High Heat Resistance

Uses	High Temperature Applications	Medical/Healthcare Applications	Non-specific Food Applications

Appearance	Beige

Forms	Granules

Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.50	g/cm³
Molding Shrinkage²
Flow	0.30	%
Across Flow	0.10	%
Water Absorption (Equilibrium)	0.040	%	ASTM D570
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	91		ASTM D2240
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	11500	MPa	ASTM D638
Tensile Strength (Yield, 23°C)	170	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	2.0 to 3.0	%	ASTM D638
Flexural Modulus (23°C)	11.9	MPa	ASTM D790
Flexural Strength (23°C)	260	MPa	ASTM D790
Compressive Strength	167	MPa	ASTM D695
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	60	J/m	ASTM D256
Unnotched Izod Impact (23°C)	610	J/m	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	372	°C	ASTM D648
Continuous Use Temperature	300	°C	UL 746B
Glass Transition Temperature	176	°C	ASTM D3418
Melting Temperature	396	°C	ASTM D3418
Flammability	Nominal Value		Test Method
Flame Rating (0.800 mm)	V-0		UL 94
Injection	Nominal Value	Unit
Drying Temperature	150	°C
Drying Time	4.0 to 6.0	hr
Hopper Temperature	60.0 to 80.0	°C
Nozzle Temperature	435	°C
Processing (Melt) Temp	400 to 435	°C
Mold Temperature	200 to 220	°C
Notes
¹These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current literature from the supplier.
²435°C nozzle, 220°C Mold

：0.00元/