塑胶原料 > 行业新闻 > 今日新到产品

Algoflon® L600

Algoflon® L600

2018-09-10 09:19:09

  

Algoflon® L600      
Polytetrafluoroethylene      
Product Description:      
Algoflon® L600 a white PTFE micronized powder produced from dispersion polymerization comprising loose agglomerates of sub-micon sized primary particles.
Algoflon® L600 can be de-agglomerated to sub-micron particle size by the application of shear providing a better dispersion and distribution of the PTFE particles in the application.
Designed for use in critical engineering and high end performance coatings to improved non-stick properties, mar and abrasion resistance. Algoflon® L600 is also highly recommended as additive for lubricants with respect to any other solid additive.
       
Main features are:      
       
Improved abrasion, scratch and rub resistance    
       
Increased slip and surface lubricity      
       
Reduced blocking      
       
Better chemical resistance      
       
Increased temperature resistance      
       
Gloss retention      
       
General  
Uses  Additive
Appearance  White
Forms  Powder

Physical Nominal Value Unit Test Method
Average Particle Size 4 µm Internal Method
Bulk Density 325 g/l ASTM D4895
Specific Surface Area > 7.5 m²/g Internal Method
Thermal Nominal Value Unit Test Method
Peak Melting Temperature 320 to 330 °C ASTM D3418
Additional Information Nominal Value 　 Test Method
Grind in Oil - NPIRI  1.5 　 NPIRI
Processing
Algoflon® L600 is used as additives in paints and coatings where improvements in non-stick, mar resistance, slip, chemical resistance, and moisture repelling characteristics are desired.
Algoflon® L600 may be used independently as an additive or in combination with polyethylene waxes. The PTFE content at the surface layer is required in order to impart the properties of PTFE to the coating.
Storage and Handling
The usual precautions for safe storage and handling of Algoflon® L600 should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Algoflon® L600 during proper storage.
Shelf life of Algoflon® L600 micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).
Safety and Toxicology
Before using PTFE Algoflon® L micronized powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
Algoflon® L600 is packaged in 25 kg non returnable drums. Each drum has one bag liner made of polyethylene resin.

上一篇:Algoflon® L206F

下一篇:Algoflon® S 121

点击这里给我发消息 点击这里给我发消息