塑胶原料 > 行业新闻 > 今日新到产品

Dynaglide® DW 645

Dynaglide® DW 645

2018-09-10 09:11:13

  

Dynaglide® DW 645      
Polytetrafluoroethylene      
Filler      
Product Description:      
Dynaglide D/W 645 is a filled PTFE material, pigmented green, specifically designed to run against aluminum. DeWAL can produce this in a thickness range from 0.015" to 0.064".
       
D/W can be used in both bearing and seal applications. This product exhibits very low fricton and wear properties running against soft mating surfaces like aluminum.
       
General  
Filler / Reinforcement  Filler
Features  Good Wear Resistance Low Friction  
Uses  Bearings Seals  
Appearance  Green

Physical Nominal Value Unit 　
Specific Gravity 2.11 g/cm³ 　
Thickness 0.4 to 1.6 µm 　
Mechanical Nominal Value Unit Test Method
Wear Factor 11.5 　 ASTM D3702
Films Nominal Value Unit Test Method
Tensile Strength - MD (Yield) 13.8 MPa ASTM D1457
Tensile Elongation - MD (Break) 230 % ASTM D1457
Additional Information Nominal Value Unit 　
Core ID 7.62 cm 　
Width 12.7 to 305 mm 　

上一篇:Dynaglide® DW 633

下一篇:Dynaglide® DW 646

点击这里给我发消息 点击这里给我发消息